BITUTEC
S
Tape
in SBS/Polysobutylene rubber and bitumen, protect self-sticking paper and with
metallic films
Main
characteristic of the range Bitutec is the self protection realized with stainless
metallic films, like natural aluminum, colorful aluminum or natural branch. They
offer the emergency of the protection against the ultraviolet beams, united to a
high adhesive power of compound rubber/bitumen that, repaired maintain in
the time the characteristics of adhesiveness and elasticity unchanged.
|
Property
-
Adhesion on several supports
-
Self-sticking
-
Resistance to beams UV
-
Applicable to cold without using flame
Emplyment
-
sealing
-
sealing of skylights, dormer windows, greenhouses
-
sealing of drains and channels
-
Tape waterproofing self-sticking for the repair and sealing of the roofs
-
Repair container and tanks
-
Realization of the sottocolmo
-
Realization of the sottoconversa
-
Optimal barrier vapor and antiroot
-
Covers in kind
-
frigorifere Cells
-
Element of splice |
 |
|
Advantages
- not demand
specialists
-
Good chemical resistance
-
Resistance to the age
-
Rapidity of rests
-
Economic
|
| Technical Data |
Aluminum |
Branch |
| Compound thickness |
1.45 millimeter |
1.45 millimeter |
| protecting Film thickness |
0.063 millimeter |
0.05 millimeter |
| Total thickness |
1.5 millimeter |
1.5 millimeter + / - 5% |
| All up weight |
1.5 +/-5% kg/mq |
1.5 + / - 5% kg/mq |
| Resistance Uv |
it resists |
it resists |
| Exercise time |
-40°C+80°C |
-40°C +80°C |
| Tearing |
> 76 N/mm |
> 51 N/mm |
| Tensile Strength |
> 55 N/mm |
> 23 N/mm |
| Lengthening |
> 6% |
> 3% |
| compound soft |
> 100°C |
> 100°C |
| Adhesion on iron |
5.8 N/mm |
5.8 N/mm |
| Adhesion on concrete |
4.9 N/mm |
4.9 N/mm |
Modality
of rests
For
it puts down it of these products, are not necessary particular tools, will be
sufficient to provide of sharp and a roll to press and put
down material in particular the sormount. In order to obtain a solid and
definitive indispensable anchorage and that the surface is very dry and lacking
in dust to preview well using of a primer bituminous. It is advised puts
down it of products BITUTEC to advanced temperatures to + 5°C
PACKAGE: the coils are manifactured singularly in a
thermoretractible covering,
in boxes and places on pallet
Heights
available: linear 10 coils of Mt with heights of cm 5 * 7.5 * 10 *
15*20*22,5*30*45 * (are available coils with heights until to 100cm) Stoccaggio:
12 months to a comprised temperature tra+5 C and +40°C (Coils sluices in pack
originals)
The values expressed in the present technical card can vary within a tolerance
of + / - 5% - the contained information in the present bulletin correspond to
the best of our current acquaintances but they do not engage in some way ns the
society Therefore is advised to verify with ability tests of the product to
the wished result.
