INTESEAL AC
sealing
plast-elastic monomember to acrylic base for elastic, long-lasting and economic
sigillature is to the inside that in outside of construction elements
Caratteristiche:
|
Characteristics:
|
Aspect:
|
Pastoso compound
white man or gray
|
|
Specific weight to
20°C:
|
ca. 1.5 g/ml
|
|
Temperature of
application
|
from + 5°C to +50°C
|
|
First hardening:
|
c.ca 1 hour to 20°C
|
|
Movement of job:
|
12 % of the width
of the joint
|
|
Thermal resistance
of exercise
|
from - 25°C to +80°C
|
|
Property: and advantages for:
-
Simplest to use
-
Excellent adhesion
superficial is smooth that porose (cls, eternit, intonaco, masonry,
fibro-concrete, wood)
-
Elevated plasticity and
elasticity
-
Economization (optimal
relationship prestazioni/rese/costi)
-
Good adhesion also on
superficial humid
-
It does not demand the use of
primers
-
Riverniciabile with
traditional varnishes 1
-
Excellent resistance to the
aging
It employs
-
Inner joints and vertical
exteriors
-
Connections between masonry
and chassis doors, windows
-
Sigillatura between walls
premanufactured to ceiling
-
Panels of tamponamento
-
Sigillatura of leaks
fissures
Modality of use:
-
The parts of the joint must
be clean, lacking in polere, oil, fat person, bitumen and ice.
-
The minimal measure of the
joint must be of milimeter 6x6, that principle of milimeter 25x20
-
The INTESEAL-AC application
comes therefore carried out with manual gun or to compressed air.
-
For particularly absorbent
supports the advisable one to make to precede one one of INTESEAL-AC diluted
with water until to pennellabile consistency.
Confection and stoccaggio:
INTESEAL-AC is available, in the
colors white man and gray, cartridges from 310 mililiter, bags from 550
mililiter. and drums from 28.5 kg. The time of magazzinaggio, in place dry and
protect from ices and heat, and until 12 months
