PAVIPLAST

FIELDS OF APPLICATION

Flooring in PAVIPLAST is indicated both for the sectors in which the aesthetic needs are predominant, such as commercial centres, shops, offices and also for the industrial sector, where high mechanical resistance associated with optimal chemical characteristics are required.

PAVIPLAST is therefore suitable for flooring in:

• - Shops

• - Offices

• - Commercial centres

• - Dairies, central dairies

• - Abattoirs

• - Pharmaceutical factories

• - Hospitals

• - Chemical and biological laboratories

• - Cellars

• - Distilleries

• - Canteens

• - Garages and parking areas

FEATURES OF THE PRODUCTS AT THE ORIGIN

PAVIPLAST:

• - Composition                      : epoxy resin and inorganic pigments;

• - Viscosity                             : thixotropic

• -Specific weight at 20"C    : 1800+/-50 g/dm3;

• - Colours                           : red, green, grey or to order for particular effects.

To meet the specific requirements of each sector, PAVIPLAST can be hardened by reaction with:

S HARDENER

E HARDENER

PACKAGINGS

• - PAVIPLAST Kg. 15+S HARDENER Kg. 4.5

• - PAVIPLAST Kg. 15 + E HARDENER Kg. 4.5

STORAGE

PAVIPLAST + HARDENER will be ruined by freezing. Store at a

temperature between 10°C and 40°C for no longer than one year.

PREPARATION OF THE MIXTURE PAVIPLAST + HARDENER

To the container of PAVIPLAST add all of the contents of the bucket of hardener, mix thoroughly with spatula or helical agitator. The packagings are already predisposed to the following ratios.

PAVIPLAST                          :100 pans in weight

S or E HARDENER             : 30 parts in weight

Then add charges (if required), in accordance with the type of flooring desired and mix again. After mixing PAVIPLAST with HARDENER, the hardening reaction begins which is faster the higher the temperature of the products and the quantity of mixture prepared. At a temperature of 20°C, a mass of 18.75 Kg of mixture should be applied within 30 minutes. At temperatures lower than 5°C no hardening reaction will occur.

APPLICATION OF THE MIXTURE PAVIPLAST + HARDENER

DUST-PROOF FLOORING

Proceed with the application of Epoxidro 03 primer on the support with a roller. After 24 hours apply the Paviplast without charges diluted with A Thinners at 20%. Immediately after the application clean the tools, by washing them with TM Thinners. During the application and for the next two days, the temperature of the support should remain between 10°C and 40°C; the relative humidity should not exceed 85%. Furthermore condensate should be avoided.

SELF-LEVELLING DECORATIVE OR CHEMICALLY-RESISTANT FLOORING

1) Application of the primer with Epoxidro

2) Proceed with the application of the mixture, with appropriate additives of Paviplast + aggregate in the ratio of 1 to 1, on the support prepared with toothed spatula to a thickness of 1000-1500 microns corresponding to a consumption of 2-2.5 Kg/m2.

3) Proceed with the rolling, by using nailed shoes and a bubble-bursting roller for the complete levelling of the charged Paviplast.

VERY THICK FLOORING

1) Apply the Epoxidro primer on the support

2) Proceed with the application of Paviplast + Hardener after adding the appropriate quantity of aggregate, by means of a toothed spatula. Thickness: 4-10 mm.

3) After 24 hours proceed with the application of Paviplast + Hardener without adding charges diluted 20% with A Thinner. Consumption: 250-300 g/m2.

FEATURES OF THE FLOORING AFTER COMPLETE HARDENING

RESISTANCE TO CHEMICAL AGENTS

** Tests done on flooring carried out with PAVIPLAST + S HARDENER with a thickness of 3 mm, seasoned for 7 days at 25°C.